Catalog
The departments, and what is actually in them.
Eight lines of trade, described by the formats, sizes and units they are normally bought in. Sizes are ranges we trade; a specific line is confirmed against stock or against the manufacturer at quotation.
Department A
Building materials
Framing, sheathing and the wet side of a build. Sizes are nominal unless stated — and the quotation says which.
| Line | Formats traded | Unit |
|---|---|---|
| Framing lumber | 2×4, 2×6, 2×8, 2×10, 2×12 · 8–20 ft · stud grade, #2 and better | piece / bundle |
| Precut studs | 2×4 × 92⅝″, 104⅝″, 116⅝″ · kiln-dried | bundle |
| Sheathing | OSB and plywood · 7/16, 15/32, 19/32, 23/32 in · 4×8 and 4×9 | sheet |
| Drywall | ½ in and ⅝ in Type X · 4×8, 4×10, 4×12 · tapered edge | sheet |
| Cement board | ¼ in and ½ in · 3×5, 4×8 · mesh-taped joints | sheet |
| Insulation | Batts R-13 to R-30 · rigid board, polyiso and EPS · faced and unfaced | bag / bundle |
| Trim & moulding | Primed MDF, finger-joint pine, PVC · ½–1 in thickness · 8–16 ft | linear ft |
| Masonry | Bagged concrete and mortar · CMU block · rebar #3–#6 · welded wire mesh | bag / piece |
Department B
Flooring
Sold by the square foot, shipped by the carton, priced by the pallet. Wear layer and core thickness matter more than the name on the box.
| Line | Formats traded | Unit |
|---|---|---|
| Rigid core (SPC) | 4–8 mm core · 12–20 mil wear layer · plank 7×48 in, tile 12×24 in | sq ft / carton |
| Luxury vinyl plank | Glue-down and click · 2–5 mm · 6×36 to 9×60 in | sq ft / carton |
| Laminate | 8 mm and 12 mm · AC3–AC5 wear rating · 7–9 in wide | sq ft / carton |
| Engineered hardwood | ⅜–¾ in overall · sawn or rotary face · 3–7 in wide | sq ft / carton |
| Solid hardwood | ¾ in · oak, maple, hickory · 2¼–5 in face | sq ft |
| Underlayment | Foam, cork, rubber · 2–6 mm · with and without vapour barrier | roll / carton |
| Transitions | T-mould, reducer, stair nose, end cap, base and quarter round | piece |
Wear layer, plainly
A 12 mil wear layer and a 20 mil wear layer can look identical in a showroom and behave nothing alike in a rental unit. The number is printed on the carton; if it is missing from a quote, ask for it before comparing prices.
Department E
Hardware & fasteners
The department that stops a job. Coating and driver type are specified, because a zinc screw in treated lumber is a call-back.
| Line | Formats traded | Unit |
|---|---|---|
| Structural screws | #9–#14 · 1¼–8 in · star or hex drive · coated for treated lumber | box |
| Nails | 8d–16d · bright, hot-dip galvanised, stainless · collated and loose | box / lb |
| Anchors | Wedge, sleeve and drop-in · ¼–¾ in · zinc and stainless | box |
| Connectors | Joist hangers, straps, post bases, hurricane ties · G90 galvanised | piece |
| Cabinet hardware | Hinges, drawer slides, pulls and knobs · standard and concealed | piece / set |
| Abrasives | 40–400 grit · discs, belts, sheets, flap wheels | pack |
Department D
Tile & pavers
Modular formats cut from the same die lot matter more than the photograph: a shade variation between two lots is visible on a finished wall.
| Line | Formats traded | Unit |
|---|---|---|
| Porcelain tile | 12×12, 12×24, 24×24, 24×48 in · rectified and pressed edge | sq ft / carton |
| Ceramic wall tile | 3×6, 4×12, 6×6 in · gloss and matte · bullnose available | sq ft / carton |
| Natural stone tile | Marble, travertine and slate · 12×12, 16×16, 18×18 in · honed and tumbled | sq ft / carton |
| Pavers | Concrete and stone · 60 mm and 80 mm · rectangular, interlocking and cobble | sq ft / pallet |
| Coping & trim | Pool coping, stair treads, bullnose, chair rail, base | linear ft / piece |
| Setting materials | Thin-set, medium-bed mortar, grout, membrane, spacers and clips | bag / pail |
Department F
Home improvement
Opening sizes drive this department. A door is ordered as a slab or as a prehung unit, and the two are not interchangeable.
| Line | Formats traded | Unit |
|---|---|---|
| Interior doors | Slab and prehung · 24–36 in · hollow core, solid core, moulded panel | each |
| Exterior doors | Steel, fiberglass and wood · with and without glazing · prehung with sill | each |
| Windows | Single-hung, slider, casement · vinyl and aluminium · new construction and retrofit | each |
| Shelving & closet | Ventilated shelving, rod and bracket, laminate panels, drawer systems | each / linear ft |
| Sealants | Silicone, polyurethane, acrylic caulk · interior and exterior · paintable grades | tube / case |
| Weatherstripping | Door sweeps, thresholds, foam tape, brush seals | each / roll |
Department G
Industrial supplies
Consumables that disappear quietly until the day they run out. Bought by the case, on a repeat schedule.
| Line | Formats traded | Unit |
|---|---|---|
| PPE | Gloves, eye and hearing protection, respirators, hi-vis, hard hats | pair / pack |
| Tapes & films | Duct, masking, gaffer, stretch wrap, shrink film, builder’s paper | roll / case |
| Blades & bits | Circular, reciprocating, hole saws, masonry and step bits | each / pack |
| Lubricants | Penetrating oil, grease, silicone spray, cutting fluid | can / case |
| Janitorial | Shop towels, absorbent, bags, cleaning concentrate | roll / case |
| Material handling | Strapping, corner board, banding tools, pallet wrap, labels | roll / box |
Department H
General merchandise
Not a standing range. Lines bought against a project, an opening order or a container plan — and quoted before anything is committed.
- Bought to order
Fixtures, appliances, furniture and packaged goods sourced against a specific requirement rather than held in stock.
- Consolidated
Several suppliers combined into one shipment where the volume justifies it, so a project receives one delivery and one set of documents.
- Quoted first
Model, voltage, finish, size and quantity are confirmed in writing before an order is placed. A photograph alone is not enough to buy against.
Department enquiry
Tell us the line,
we will send the format.
If a size or finish is not listed here it does not mean we cannot get it. Send the specification and we will quote what is available against your date.
Or email the trade desk at info@onesourcedepot.net